The SG-237 is designed with high density surface mount components on a 4 layer PCB, providing high efficiency, reliability and performance. The PCB is mounted on a sturdy chassis plate which provides an excellent electrical and RF ground system. The unit is fully waterproof (under 2 ft of water for 24 hours). The case is weather resistant, high grade ABS plastic that is sealed at the factory.
Use for base, mobile, portable, marine or aviation.
The SG-237 is our most popular Smartuner. It's rugged construction and small size allow maximum flexibility. It has a 100W power rating and additional frequency coverage to 60MHz, matching it perfectly with the most popular HF transceivers. It will work with any balanced or unbalanced antenna including whips, backstays, dipoles, loops and longwires, and requires a minimum of only 28 feet of antenna for full coverage operation.
Technical Specifications.
HF Frequency Range: Power Input Range: Input Impedance Range: VSWR: DC Input Requirement: DC Operating Range: Input Current: Average: Recurrent set time: Memory Capacity: Possible Tuning Combinations: Antenna Length: Installation: Operating Temperature: Size: Weight: Case Construction: Control Cable: Control Cable Length:
1.8 to 60 MHz 3 to 100W (PEP) and 40W (continuous) 45 to 55 ohms Typical: Less than 2:1 +13.8 VDC (nominal) +10.5 to 18 VDC 300 milli Amps Typical: Less than 2 seconds Typical: Less than 10 milliseconds 170 non-volatile locations 1/2 million Minimum: 7 feet (3.5 to 60 MHz) / 28 feet (1.8 to 60 MHz) Any position, ideal at antenna feed point -35 to +70 degrees C 9L x 7W x 1.85H inches 2 pounds Waterproof ABS plastic cover on an anodized aluminum base Shielded 4 conductor RG-58 coax with PL-259 connector 9 feet standard, custom to-order
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.