IC-2720H 2m/70cm FM Mobile
Price: $499.00

V/V, U/U simultaneous receive capability
The IC-2720H is a unique dual band mobile, providing VHF/VHF, UHF/UHF simultaneous receive capability along with VHF/UHF full duplex operation. Simple touch of a button changes the transmit band.
Independent controls for each band
Operating two bands simultaneously is very simple with Icom's symmetric layout with a wide LCD display showing both band settings in an easy to read side by side format. The IC-2720H provides separate tuning, volume, squelch knobs and function buttons for the left and right side bands. Also, listen to both bands independently through separate left and right band audio jacks.
Dynamic Memory Scan (DMS)
With 212 memory channels, Icom's exclusive Dynamic Memory Scan system gives you flexibility over your fully customizable in 10 banks.
Wideband Receiver
Keep on top of what is happening with the IC-2720H's wideband receiver. Covering from 118-549 and 810-999 MHz*, you will be able to listen to almost any communications! (* Receiver range differs depending on version)
HM-133, Remote Control Microphone
The Icom exclusive "Hot keys" (F1/F2) memorize the most commonly used transceiver settings.
DTCS and CTCSS
The IC-2720H incorporates 104x2 DTCS and 50 CTCSS tones codes along with a tone scan function. Don't miss out on communications because of not having the proper type of "tones"! The "pocket beep" feature gives you an audible and visible indicator of an incoming call.
Compact, Remote Controller
The controller with the 3.5m (11.5') separation cable is an easy to install two pieces configuration. This configuration offers the flexibility of mounting the controller while placing the main unit in an out-of-the-way location without any additional cost. Microphone jacks are mounted both on the controller and main unit of the radio!
And More...
- 10dB RF attenuator
- Selectable squelch delay
- 9600bps packet data terminal (mini-D 6-pin connector)
- Optional MB-85 allows you to mount the controller to the main unit
- 14 DTMF memory channels (24 digits)
- Sub band auto mute function
- MOS-FET power amplifier
- Auto repeater function
- Wide/narrow channel spacing
- 3 Year Icom Australia Warranty
Accessories List
| Programming Options |
|
R.R.P. |
| CS-2720 |
Cloning Software |
$92.40 |
| OPC-478 |
D SUB 9 pin Programming Cables (PC to Transceivers) |
$66.00 |
| OPC-478UC |
USB Programming Cable [Req CS-208] |
$66.00 |
| Microphones |
|
|
| HM133 |
Remote Control DTMF Microphone (same as supplied) |
$138.60 |
| HM154 |
Regular Hand Microphone |
$74.80 |
| HM154T |
DTMF Microphone |
$127.60 |
| Mounting Brackets/Base |
|
|
| MB65 |
Mounting Base |
$61.60 |
| MB84 |
Controller Bracket |
$22.00 |
| MB85 |
Combination Bracket (Same as supplied) |
$26.40 |
| Cables |
|
|
| OPC-440 |
Mic Extention Cable 5m |
$114.40 |
| OPC-441 |
Speaker Extension Cable |
$48.40 |
| OPC-589 |
Mic Adapter Cable |
$39.60 |
| OPC-647 |
Mic Extention Cable 2.5m |
$74.80 |
| OPC-1132 |
DC Power Cable 3m |
$39.60 |
| OPC-1156 |
Separation Cable 3.5m (for operation with the front panel detached) |
$39.60 |
| External speakers |
|
|
| SP10 |
External Speaker 4Ohm, 5W, Tweeter |
$83.60 |
Please Note: Prices Above Are R.R.P. More Often Than Not On Expensive Accessories
Better Pricing Can Be Achieved Than Those Listed Above.
Download PDF
|