IC-PW1
HF/50 MHz All Band 1kW Linear Amplifier
Price $8995.00
 Bonus, Free Delivery Australia Wide.
Wide frequency coverage with 1 KW output *
All HF bands plus 50 MHz are covered. The IC-PW1 provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz * . In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break -in operation are possible. Great for DX'peditions or contest operation.
*Guaranteed within amateur bands only.
Wide ALC adjustable range
Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1 can be used with almost any HF, 6 m or HF/6 m rigs - not only Icom rigs * !
*Ask your dealer about usable exciters.
Compact body
Dimensions, including amplifier, power supply, tuner and controller, are only 350(H) x 269(W) x 378(D)mm* And, because the controller is detachable, the IC-PW1 can be installed almost anywhere in your shack.
*6 25 / 32 (H) x 2 25 / 32 (W) x 9 1 / 16 in.
Other outstanding features
- Automatic antenna tuner built-in
- Automatic AC input voltage selector is employed
- Current (Ip), Voltage (Vp), temperatuer, SWR and output power protectors are available
Specifications
General
Frequency Coverage (MHz) |
: |
1.800 - 1.999 |
3.500 - 3.999 |
7.000 - 7.300 |
10.100 - 10.150 |
14.000 - 14.350 |
18.068 - 18.168 |
21.000 - 21.450 |
24.890 - 24.990 * |
28.000 - 28.700 * |
50.000 - 54.000 |
*Inhibited in the US version. |
Power supply requirements |
: |
180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz) |
Current Drain |
: |
Less than 15 A (max. output at 200 V)
Less than 20 A (max. output at 100 V) |
Usable temperature range |
: |
-10°C to +40°C;
+14°F to +104°F. |
Duty cycle |
: |
Full duty |
Input connector |
: |
SO-239 x 2 (50 ohm) |
Output connector |
: |
SO-239 x 4 (50 ohm) |
Linear Amplifier
Output power |
: |
AC Input 180-264 V AC 90-132 V AC
CW, RTTY |
1 kW |
500 W |
SSB |
1 kW PEP |
500 W PEP |
|
Driving power |
: |
Max. 100 W |
Spurious emissions |
: |
Less than -60 dB (HF bands)
Less than -50 dB (50 MHz) |
Antenna Tuner
Output matching range
(tuner switch ON) |
: |
16.7 ohms to 150 ohms impedance (HF bands)
20.0 ohms to 125 ohms impedance (50 MHz) |
Auto tuning accuracy |
: |
VSWR 1.5:1 or less |
Min. required input power |
: |
60 W |
Insertion loss |
: |
Less than 1 dB (after tuning) |
Supplied Accessories
- Controller separation cable
- ACC cables
- Coaxial cable with PL-259 plugs
 Download PDF
|
|
